MOVACRYL – Carbon Lamination Resin - Image 1
Click to enlarge
Type-30: Knee Joint w/ Bale Lock
Type-30: Knee Joint w/ Bale Lock $29.00
Back to products
MOVACRYL – Lamination Resin (Hard)
MOVACRYL – Lamination Resin (Hard)

MOVACRYL – Carbon Lamination Resin

  • Lamination resin for carbon fiber applications
  • Viscosity approx. 250 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Working Time approx. 30 min.
  • 85 Shore D hardness
Add to compare
Add to wishlist
Category:
Shipping & Delivery

Related products

Add to compare

Carbon Fiber Fabric

  • Twill design for high-strength laminate reinforcements
  • Good absorption of lamination resins
  • 3K Fabric – 200 g/m²
Add to wishlist
Quick view
Add to compare

FLEX Soft Socket Plate

  • Flexible plates specially for soft socket applications
  • Very small shrinkage during cooling down
  • Hardness: Approx. 40 Shore D
  • Process temperature: ∼ 160°
  • Heating process: 2 min / mm
  • 20 Shore D version is available upon demand
Add to wishlist
Quick view
Add to compare

M01 Perlon Stockinette

$29.00
  • General use stockinette for fabricating laminates and reinforcing sockets
  • Knitted and finely meshed fabric
  • Good stretching properties
Add to wishlist
Quick view
Add to compare

M02 Stump Sock with Pin hole

$29.00
  • Soft and cushion stump sock with pin hole
  • Made by Cotton
Add to wishlist
Quick view
Add to compare

M03 Stump Sock

  • So and cushion stump sock without pin hole
  • Made by Cotton
Add to wishlist
Quick view
Add to compare

MOVACRYL – Lamination Resin (Soft-Flexible)

  • Mixable with MOVACRYL Hard and Carbon resins between 10 – 30 %
  • Viscosity approx. 400 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Shore A hardness: 65 to 95
Add to wishlist
Quick view
Add to compare

MOVACRYL – Sealing Lamination Resin

  • Viscosity approx. 300 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Working Time approx. 10 min.
  • 85 Shore D hardness
Add to wishlist
Quick view
Add to compare

Polyform

  • Thermoformable material at 130°
  • Suitable for fabricating for Inner socket
  • Multiple thickness options are available
Add to wishlist
Quick view