Click to enlarge
MOVPigment
Back to products
Hip Joint with Extension Mechanism

MOVACRYL – Hardener

  • Hardener for MOVACRYL resin series. Applicable for all of them.
  • Two different packages available.
Compare
Add to wishlist
Category:
Shipping & Delivery

Related products

Compare

MOVACRYL – Sealing Lamination Resin

  • Viscosity approx. 300 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Working Time approx. 10 min.
  • 85 Shore D hardness
Add to wishlist
Quick view
Compare

Polypropylene Plate

  • Polypropylene Plate with excellent formability
  • Quite little shrinkage during cooling
  • Process temperature: ∼ 185°
  • Hardness: Approx. 70 Shore D
  • Heating process: 3 min / mm
Add to wishlist
Quick view
Compare

Multicolor EVA Pads

  • EVA Pads for general use
  • Two different designs are available
  • Two thicknesses are available
Add to wishlist
Quick view
Compare

FLEX Soft Socket Plate

  • Flexible plates specially for soft socket applications
  • Very small shrinkage during cooling down
  • Hardness: Approx. 40 Shore D
  • Process temperature: ∼ 160°
  • Heating process: 2 min / mm
  • 20 Shore D version is available upon demand
Add to wishlist
Quick view
Compare

M05 Stump Sock for AK

  • Soft and cushion stump sock with and without Pin Hole Options
  • Specially produced for AK
  • Made by Cotton
  • Length is 40 cm, Diameter is 18 cm.
Add to wishlist
Quick view
Compare

MOVACRYL – Lamination Resin (Soft-Flexible)

  • Mixable with MOVACRYL Hard and Carbon resins between 10 – 30 %
  • Viscosity approx. 400 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Shore A hardness: 65 to 95
Add to wishlist
Quick view
Compare

M04 Nylon Stockinette

  • Nylon stockinette for fabricating laminates and reinforcing sockets
  • Knitted and finely meshed fabric
  • Good stretching properties
Add to wishlist
Quick view
Compare

MOVACRYL – Carbon Lamination Resin

  • Lamination resin for carbon fiber applications
  • Viscosity approx. 250 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Working Time approx. 30 min.
  • 85 Shore D hardness
Add to wishlist
Quick view