Click to enlarge
Swipe Foot
Swipe Foot
Back to products
E 86 Polycentric Knee Joint with Extension Mechanism
E 86 Polycentric Knee Joint with Extension Mechanism

Multicolor EVA Pads

  • EVA Pads for general use
  • Two different designs are available
  • Two thicknesses are available
Compare
Add to wishlist
Category:
Shipping & Delivery

Related products

Compare

FLEX Soft Socket Plate

  • Flexible plates specially for soft socket applications
  • Very small shrinkage during cooling down
  • Hardness: Approx. 40 Shore D
  • Process temperature: ∼ 160°
  • Heating process: 2 min / mm
  • 20 Shore D version is available upon demand
Add to wishlist
Quick view
Compare

MOVACRYL – Lamination Resin (Soft-Flexible)

  • Mixable with MOVACRYL Hard and Carbon resins between 10 – 30 %
  • Viscosity approx. 400 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Shore A hardness: 65 to 95
Add to wishlist
Quick view
Compare

MOVFoam and Hardener

  • 30 Shore D Hardness Foam
  • Perfectly grips onto acrylic sockets
  • Expansion start time: 1 min
  • End of expansion: 2 min 30 seconds
  • Expansion ratio: Approx. 5 times
  • Resin / Hardener ratio. 100 / 100
  • Density 230 g/L
Add to wishlist
Quick view
Compare

Transparent Check Socket Plate

  • Plates made specially for the check (test) sockets
  • “Transparent” visual to see through the socket
  • Process temperature: ∼ 160°
  • Hardness: Approx. 80 Shore D
  • Heating process: 3 min / mm
Add to wishlist
Quick view
Compare

MOVACRYL – Sealing Lamination Resin

  • Viscosity approx. 300 mPa.s
  • Resin / Hardener ratio. 100 / 2 to 3
  • Working Time approx. 10 min.
  • 85 Shore D hardness
Add to wishlist
Quick view
Compare

M04 Nylon Stockinette

  • Nylon stockinette for fabricating laminates and reinforcing sockets
  • Knitted and finely meshed fabric
  • Good stretching properties
Add to wishlist
Quick view
Compare

M03 Stump Sock

  • So and cushion stump sock without pin hole
  • Made by Cotton
Add to wishlist
Quick view
Compare

Polyform

  • Thermoformable material at 130°
  • Suitable for fabricating for Inner socket
  • Multiple thickness options are available
Add to wishlist
Quick view